PUREPLACE BUILDING PRO
21
USER MANUAL
5. Slide the three screw slots, on the back of the unit, over and down the
three #10 pan head wood screws.
6. Locate the (C) #10 flat head wood screws and drive them into the two
mounting holes under the Green AFLPCO™ Cell. The included wall an-
chors may be needed in hollow walls to secure the unit effectively in the
absence of a stud.
7. Insert the Green A F L PCO™ Cell and
Access Panel into their original posi-
tions using the instructions on pages
22-26.
Initial Start Up
Once the installation process is complete, plug the OCTO PurePlace Buil-
ding Pro into a 110-240 VAC electrical outlet. Your OCTO PurePlace Buil-
ding Pro was designed for continuous operation. For maximum effective-
ness, operate the unit 24 hours a day, 7 days a week. To start up the unit,
press the switch to the HIGH or LOW position. The OCTO PurePlace Buil-
ding Pro will start, with the green lights, blue lights and OCTO PurePlace
Building Pro letters illuminating.
(C)
MOUNTING SLOTS
