PUREPLACE BUILDING PRO
26
USER MANUAL
5.
Insert the new Green AFLPCO™ Cell by inserting the lamp pins into
the four pin connectors first and then lower the back of the Green
AFLPCO™ Cell until you hear the retaining clip activate
6.
Use a small flat head screw driver or other flat object to depress the
Lamp Reset switches for 3 seconds each. Once the lamp is reset the
blue Lamp Replacement light will stop blinking.
7.
Connect the power adapter and rock the power switch to the high
position. Verify that all indicator lights are illuminated and the Lamp
Status light is green. If the light turns red verify the lamp pins are fully
inserted into the four pin connectors.
FOUR PIN CONNECTORS
LAMP RESET BUTTONS
