PUREPLACE BUILDING PRO
20
USER MANUAL
HORIZONTAL MOUNTING
1. There are two screw holes located under the Green AFLPCO™ Module.
Remove the Green AFLPCO™ Cell access panel and Green AFLPCO™
Cell using the instructions on pages 22-26.
2. Locate the (A) #10 pan head wood screws and (B) screw plugs included
with the product.
3. Using a Phillips head screw driver,
drive the first screw into a screw
plug for secure mounting leaving
the screw head approximately 1/8”
from the wall. This screw will slide
into the center mounting slot on
your OCTO PurePlace Building Pro
in step 4. The included screw plug
may be needed in hollow walls to secure the unit effectively in the ab-
sence of a stud.
4. Drive a #10 pan head wood screw into the wall 4” above and below the
first screw. The three screws must be level in a straight line.
(A)
(B)
MOUNTING SLOTS
