e l e C t r O n i C s
Q47 standard & Q47e/Q47ce Deluxe Consoles and Keypads
Welcome to some of the easiest to use, yet most sophisticated, electronics available in the fitness industry. In
purchasing your Octane elliptical you had three choices: the Q47 with standard electronics, the Q47e with deluxe
electronics, or the Q47ce with deluxe electronics plus contact heart rate sensors. Instructions for all are included
in this manual.
programming the console
DedicatedLogic™ programming was created to give you the ultimate in ease of use
and total flexibility for programming your elliptical. This allows you to modify your
workout once you’ve started. You can even start your workout, then program the
electronics. This ease of use starts by giving each key only one function. This makes
it easy to understand how each key works.
Keypad Buttons
Quick start
The easiest way for you to start your workout is to simply push the Quick Start
button, setting the machine in a manual program at resistance level one with a
stride length of 21” (52 cm) and a user weight of 150 pounds (68 kg). Once you have
selected Quick Start, you can program any item in any order.
My Quickstart & 2
The My QuickStart buttons take the traditional Quick Start to the next level by
memorizing your workout profile. My QuickStart remembers your favorite program
and attributes and, with a simple push of the button, retrieves them for your next
workout.
You can easily set your profile while using the machine. Simply begin your workout
and enter your information as usual—program, time, stride length, level, age, and
weight, adding X-Mode, ArmBlaster, GluteKicker, and/or SmartStride if you wish.
Once your elliptical cross trainer is set the way you like it, simply press and hold
the My QuickStart 1 (or My QuickStart 2) button until you hear the console beep
twice, indicating that this favorite profile has been saved. If you decide during your
workout to change what you have saved (for example, you decide to increase the
time or level), simply enter the changes on the console, then press and hold My
QuickStart again until you hear the two beeps. This resets your saved profile using
the new attributes.
The next time you are ready for your favorite workout, simply press the My QuickStart
button and begin pedaling. You may also switch to your favorite program after you
have started a workout; simply press Pause/Clear to reset the machine, then press
My QuickStart to begin your program.
Tip:
Use My QuickStart 1 and My QuickStart 2 to save two different workouts.
Save the first one according to the directions above, then press Pause/Clear
and follow the steps again to save the second workout using the other My
QuickStart button
.
Tip:
If you feel like doing something different after you have started your favorite
workout with My QuickStart, simply enter your new information. This will
only change the current workout, not your saved favorite
.
Note:
Your profile is saved even when you unplug the machine.
(Q47e/Q47ce)
