ENG-1
ENGLISH
CROSS CiRCUIT PRO KIT for LateralX
Left Side Weight Stand
Right Side Weight Stand
Assembly and Safety Instructions
End Caps (2)
Hardware Kit (see illustration)
Kit Contents
Assembly Instructions
Remove Phillips screws (Qty 3)
and plastic covers.
Place weight stand on machine;
insert pin (A).
Assemble bolt (B) and
washer (C) (Qty 2) and insert
at rear of stabilizer; tighten to
10 ft-lbs.
Assemble bolt (B) and washer
(C) (Qty 1), insert in pin (A) and
tighten to 10 ft-lbs.
Install end cap.
Repeat
-
for other side.
Tools Required
5mm hex key wrench (included)
6mm hex key wrench (included)
#2 Phillips screwdriver
Summary of Contents for LATERALXLX8000
Page 1: ...ASSEMBLY OPERATIONS INSTRUCTIONS CROSS CiRCUIT PRO KIT ...
Page 2: ...ii ...
Page 19: ......
