BA_OTE 3+4_Endkunde_EN_V03_20170726.docx
Page 5 of 52
3
Description
3.1
System OTE
The OTE © heat pump control contains
appliances for the automatic control of
heat pump heating systems with cooling
function as well as hot water heating. The
standard system always comprises at
least 2 components: OTE and operating
facility.
Fig. 1: OTE control in the heat pump
A control unit can regulate the following
system circuits/heat generators.
-
1x direct circuit (HEATING and/or
COOLING)
-
1x mixed circuit (HEATING and/or
COOLING)
-
1x directly heated hot water tank
(with auxiliary heater)
-
1x heat pump (HEATING and
COOLING)
-
1x additional heat generator (electri-
cal auxiliary heater or release contact
for external heat generators).
All types of heat pumps can be controlled
(HEATING/COOLING):
-
Brine/Water heat pumps
-
Water/Water heat pumps
-
Direct extraction/Water heat pumps
-
Air/Water heat pumps with integrat-
ed de-icing
All settings required in the system can be
made via the Master Control Panel (Mas-
ter Control Panel can either be the basic
appliance or the room terminal with
touch display).
Fig. 2: Basic control panel
3.2
Further control elements
Further control elements are the room
control or the room terminal with touch
display. Room controls can be installed in
any desired room. The room terminal
with touch display is usable as either a
room control or as a Master Control Pan-
el with additional functions.
Fig. 3: Room controls
Fig. 4: Room terminal with touch display (op-
tional)
Heating m ode
OCHSNER OTE
MENU
Sa 05.08.2017
08:10
