BA_OTE 3+4_Endkunde_EN_V03_20170726.docx
Page 3 of 52
1
General
The following manual is intended to be a
support for the operation of OCHSNER
heat pumps which are equipped with the
OCHSNER Tronic Easy
© (OTE) heat
pump control.
The precautionary pointers below will be
used in this document.
WARNING
Pointers which, if not heeded, can mean
danger to life and limb, and can also lead
to material damage. These pointers must
be heeded without fail.
ATTENTION
Pointer which, if not heeded, can lead to
an appliance malfunction and to material
damage (to system components, building,
...). These pointers must be heeded with-
out fail.
Tips which are intended to aid the job in
hand, or mean additional information for
the user.
1.1
Proper use
The control has been designed so that it
can be deployed in many different sys-
tems. It is thus possible that not all the
functions described here are used in your
system and accessories (such as sensors,
room remote controller etc.) are not in-
cluded in the scope of delivery.
The control may only be used for
the following purposes:
•
Energy processing via heat pumps
and/or additional energy generators
(oil/gas/electricity).
•
Hot water heating for hot water stor-
age tanks.
•
Heating or cooling operation for direct
circuits and/or mixing circuits.
Any further uses are not recognised as
proper. OCHSNER accepts no liability for
possible damage (non-compliance with
instructions).
1.2
CE-Labelling
The product you have purchased con-
forms to the technical regulations valid at
the time of manufacture, and is CE-
conform.
NOTE
