EYES
HD GEN2
2020 INSTALL & OPERATION MANUAL
11
4
Operation / Maintenance
4.1 OPERATION
When power is applied to the camera, the video output should be active. Note that when using an HD-SDI to HDMI
converter, there may be a small delay on power on while the system locks to the HD-SDI signal.
4.2 MAINTENANCE
Marine growth can build up quickly on the camera lens and can reduce the performance in just a few weeks.
To help prevent this, all OceanLED Eyes Cameras have been coated with a specialized Tritonium® coating which
makes the surface of the glass lens a non-stick layer. Lenses should be cleaned with a boat brush or similar
biweekly, or as needed to keep the lens of the camera clean.
Growth varies greatly around the world and maintenance is imperative to the proper operation and longevity of the
product. If heavy fouling occurs, barnacles can be removed from the lens using a plastic scraper and moderate
pressure under water. If cleaning the lens while the boat is out of the water, wet the lens before scraping. Never scrape
or try to remove barnacles from a dry lens.
Never use high pressure jet wash to clean the lens / bezel.
