Page 32 of 36
difference between the ECO mode and the COMFORT mode is 3.5°C. Each time you press the
buttons to adjust the temperature, you increase or decrease the temperature by 0.5°C. Press
any other button except
/
to finish the setting, otherwise after 5 seconds without action
the setting is saved. When the room temperature is higher than the selected temperature, the
heater will stop heating.
5. Keyboard lock
Press M button for three seconds to activate the keyboard lock function, in order to unlock, press
M again for three seconds.
Remarks:
1. The keyboard lock function doesn’t lock the standby
button.
2. The keyboard lock function will automatically be deactivated under below
circumstances.
1) the appliance is put into standby mode by pressing standby
button.
2) the appliance suffers power disconnection.
You need to set again by pressing M for 3 seconds if you need this function.
6. Window detector function
Press
to enter window detector function. Then press “
/
” to choose “ON” or “OFF”.
If “ON” is selected, the window detection function is activated and
icon will show on the
screen. When temperature decrease detected, the appliance will automatically enter anti-freeze
mode with
icon flashing. If temperature rises up, the appliance will go back to previous
mode with
icon on. You can c
hoose “OFF” to inactivate the window detection function.
Remarks: the window detector function is not available under anti-freeze mode.
7. In case of power failure
All the above settings for temperature, time, the date of week and the programs remain valid until
the electric power is not cut.
In case of power failure, the device keeps in memory only the parameters, temperature and
operating mode. When power is restored, the clock must be set again to operate the various
programs correctly.
Keyboard lock
Summary of Contents for OCEAISHFT1000W
Page 39: ...www oceanic eu...
