Page 22 of 36
•
If the power cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
•
The appliance should not be placed immediately
below a socket.
•
WARNINGS
：
In order to avoid
overheating, do not cover the heater.
•
Do not use this heater with a programmer, timer,
separate remote control system or any other
device that turns on the heater automatically
because there is a risk of fire if the device is
covered or placed incorrectly. Use only a remote
control device connected by the pilot cable.
•
The device must be powered by a Residual
Current Device (RCD) with a rated operating
differential current of not more than 30 mA.
•
Warning: if this appliance is installed in a
bathroom, it must be installed at least 60 cm
from a bath or shower (volume 2), in accordance
with the requirements of the French electrical
installation standard NFC 15 -100.
•
The device must be connected to a circuit
independent electric protected by a bipolar
circuit breaker according to the standard
electrical installation NF C 15-100.
•
Means for disconnection from the supply mains
having a contact separation in all poles must be
incorporated in the fixed wiring in accordance
with the wiring rules.
Summary of Contents for OCEAISHFT1000W
Page 39: ...www oceanic eu...
