Sauna & Steam
Oceanic Saunas 01902 450 550 [email protected]
12
Steam Generator Manual
To drain
Water inlet
Pressure reducer valve
300mm
Pressure release valve
Steam outlet nozzle
Steam pipe 10m max
insulated above 5m
7.3. Water and Steam Connections
i. The water supply pipe and steam pipe should comply with local standards
ii. Connect the water inlet valve of the generator to the mains water supply using a flexible
hose with 1/2 inch fittings.
iii. Steam outlet (1/2 inch or 3/4 inch) use the same dimension copper pipe to connect it, if the
steam pipe is longer than 5 meter it should be insulated. During use the steam pipe will
be very hot and must be protected against accidental contact. Note that according to the
location it may be necessary to attach an additional length of pipe to the pressure relief valve
in order to divert the steam flow to a safe direction should the valve operate.
iv. Connect the drain outlet to a suitable drain via a copper pipe with the appropriate fittings.
