Sauna & Steam
Oceanic Saunas 01902 450 550 sales
@oceanic-saunas.co.uk www.oceanic-saunas.co.uk
22
Sauna Heater Manual
13.5. Sauna Cabin
i. Ensure all signage (safety and usage) is in place and in a readable condition.
ii. Check the benches are secure and have no signs of deterioration, if benches have become
loose ensure they are tightened correctly.
iii. If there are any splinters on the bench sand over lightly until they have been removed.
iv. Any major damage to the benches should be reported to the supplier and further advice will
be given.
v. Ensure the timbers surrounding the heater have not become charred. Any offending timber
slats should be replaced in a reasonable time period.
vi. Ensure that the heater guard is in place and conforms to the clearance distances stated in
the sauna heater manual. Check for any signs of charring and replace the heater guard if it is
showing signs of disrepair.
vii. The sauna cabin should be kept in a clean and hygienic state at all times. It is recommended
that the benches in the sauna are wiped down with a weak solution of disinfectant and water
after each use we especially recommend this in commercial divisions. The floor in the sauna
should be mopped regularly.
14. Warranty & After Sales
All Oceanic Sauna Heaters are guaranteed for 12 months from the date of purchase against faulty
materials or workmanship. The guarantee excludes consumable items such as the electrical
elements and faults arising from misuse or abuse of the appliance.
Elements last for 2500 hours, after this time has passed you should be expecting to buy new ones,
premature failure can be caused by:
-
A half filled rock basket.
-
Rocks forced against elements from bad filling
-
Customers throwing large amounts of water over the rocks, for heavy duty places we
recommend screwing the bucket to the bench this prevents this from happening.
-
Incorrectly wired heater.
For warranty claims and after sales service outside or the guarantee please contact your local
Oceanic dealer.
If you encounter any difficulty with this assembly procedure or think we could have explained
anything more clearly we would welcome your comments, please call 01902 450550 or
01902 871127 technical help line.
