Sauna & Steam
Oceanic Saunas 01902 450 550 sales
@oceanic-saunas.co.uk www.oceanic-saunas.co.uk
19
Sauna Heater Manual
These can be adjusted easily, if the electricity supply is lost the controller will return to default
settings.
•
When the sauna is turned on the time settings will work under A model (A model LED is on),
the time window will display the last time that was set. Press” SET” key the time display window will
flash. press “
p
” or “
q
” to adjust the time, every press the time will increase or reduce 10 minutes.
once the desired setting is reached press “ MENU/ENTER” the window will stop flashing. You can
adjust from the time from 10 minutes to 8 hours. Note the controller has a memory function, if the
power supply is not cut off the next time you turn on steam generator the time you selected will be
the default time.
•
To set your heater to come on at a certain time (for example: if you plan to watch a film and
want the sauna to start heating up half way through so its ready at the end of the film) you can use
the B model setting which can be set if you press the “MENU/ENTER”” and the time window will
display 4:00, now Press” SET” key the time display window will flash. press “
p
” or “
q
” to adjust the
time, every press the time will increase or reduce 10 minutes. once the desired setting is reached
press “MENU/ENTER ” the window will stop flashing., when it reaches “0” it will switch over to A Model
and the heater will turn on. (Remember to set the time you want the heater on for on A Model before
setting B Model)
•
For quick time adjustment: hold the “
p
” or “
q
” and it will count continuously up or down,
when it reaches the time you want release and it will stop.
•
Temperature: switch button you can switch between centigrade and Fahrenheit.
•
To adjust temperature: Press “SET ” once after you finish setting the time or otherwise twice
the temperature window will flash, enter the required temperature by pressing “
p
” or “
q
” to adjust
- every press will increase or reduce 1
O
Cor 2
O
F.you can adjust from 50
o
C-110
o
C 122
o
F-230
o
F once the
required temperature has been set press “ MENU/ENTER” key the window will stop flashing.
11.3. Door Interlock
When used in commercial situations such as public buildings where the countdown timer is set to
come on in advance the door interlock switch must be connected as described in Fig 2 – before the
timer is set to come on in advance the sauna room must be checked by the responsible person to
ensure there is no hazard such as combustible material left over the sauna stove etc – then the sauna
cabin door must be closed before the setting can be made – once the advance timer begins the
countdown sequence if the door is opened the timing will stop and will not restart again until it is
reset.
12. Trouble shooting Guide
