background image

icListen User Guide

10

v2021.1

4.  Plug the Power Down Tool (-9v battery) barrel connector into the power barrel connector on 

the test cable for 1-2 seconds then remove. (Do not leave the Power Down Tool plugged into 

the test cable attached to the hydrophone as it can drain the battery on the Power Down 

Tool.)

The hydrophone is now turned off.

Notes

• 

If the icListen is powered down for 3 or more weeks, the hydrophone’s internal clock time 

will reset to January 1, 2010. 

• 

In older units the time will automatically reset to January 1, 2010 after each power down.

• 

The battery charge will be reset and a lower battery charge (up to 20%) is expected 

when the unit is repowered, the charge percentage will be accurate at full charge.  

  

Standby Mode

Standby Mode is a low power mode which can extend battery life to 5 days. Settings will be 

remembered, and recording (if enabled) will continue when woken from Standby Mode.  

Charging the icListen

To charge the icListen, connect the hydrophone to a power outlet using the test cable. If fully 

depleted, the hydrophone will require approximately 8 hours to regain a full charge. 

• 

The icListen can remain plugged into a power source during use. 

• 

Only use the charger supplied by Ocean Sonics to charge the instrument. If you require 

another charger please contact Ocean Sonics. 

• 

Store the icListen with batteries at 40% -  60% charge. See 

“Battery Care” on page 40 

for more information.

Summary of Contents for icListen














































Reviews: