- Press the TIMER button, and the TIMER ON indicator
light will illuminate to indicate that the AUTO START
program is initiated.
- Press the TIMER button again to show the TIMER
OFF indicator light which indicates that the AUTO
STOP program is initiated.
- Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto START/
STOP program.
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED (light) will
illuminate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
- Press or hold the UP or DOWN button to change the
timer duration by 30 minute increments, up to 10
hours then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start/
stop. The selected time will register in 5 seconds, and
the system will automatically revert back to display
the previous temperature setting or room temperature
when the unit is on (when the unit is off, there is no
display).
