HOW TO INSTALL
NOTE: Top rail and Sliding Panels at each side are offset to provide the proper pitch to the rear of (5/16
"
). This is
necessary for proper condensed water utilization and drainage. If you are not using the Side Panels for any
reason, this pitch to the rear must be maintained by other means.
Place the unit on a floor, a bench, or a table. Be sure that the left and right window filter panels are on the
proper side. When installed, the flange for securing the panel in place to the window sill should be facing
into the room.
A. Hold the Accordion Panel with one hand and
gently pull back the center to free the open
end. See Fig. 1.
B. Slide the open end panel directly into the side
cabinet as shown in Fig. 2 & 3. Slide the panel
down. Be sure to leave enough space to slip
the top and bottom of the frame into the rails
on the cabinet.
