Press or hold either LEFT (<) or RIGHT (>) button
until the desired temperature is shown on the
display. This temperature will be automatically
maintained anywhere between 62°F (17°C) and
86°F (30°C). If you want the display to read the
actual room temperature, see
"
To Operate on
Fan Only
"
section.
Press to select the Fan Speed in four steps -
AUTO, LOW, MED, or HIGH. Each time the button
is pressed, the fan speed mode is shifted. For
some models, the fan speed cannot be adjusted
in HEAT mode. On DRY mode, the fan speed is
set to LOW automatically.
● To select mode, press the Mode button. Each
time you press the button, the mode will change
based on the sequence from AUTO, COOL, DRY,
and FAN. The indicator light will show the mode
selected.
● When you set the air conditioner to AUTO mode,
it will automatically select cooling, heating (not
available in Cooling-only models), or fan only
operation depending on the temperature selected
and the current room temperature.
● The air conditioner will adjust room temperature
automatically to the approximate temperature
point set.
● In this mode, the fan speed cannot be adjusted,
as the fan speed is being controlled automatically.