ACCESSORIES
CEILING PANEL DUCT KIT,
CK-8
A ceiling panel kit is available for discharging the
condenser air above a drop ceiling. The ceiling
panel duct kits are furnished with an 8-inch white
vinyl coated flexible duct that allows for
convenient installation. A 2ft X 2ft ceiling
duct-panel is included to replace a 2ft X 2ft
drop-ceiling panel where the connection is
desired. The CK-8 ceiling panel kit consists of a
2' X 2' lay in ceiling panel with duct flange, 8-Inch
vinyl coated flex-duct and the CDA-8 discharge
adapter that attaches to the condenser air
discharge opening on the back of the unit.
Note
—Drop ceiling spaces should be vented
or large enough to handle the warm
condenser air. Check local codes to assure
compliance
.
CEILING PANEL
CONVERSION KIT, CVK-8
The CK-8 can be converted to a dual ducted
ceiling panel by use of the CVK-8 conversion kit.
The kit contains the parts necessary to install a
second 8-Inch duct flange and a condenser
discharge baffle onto the CK-8 ceiling panel.
This allows for ducting of condenser air to and
from the drop ceiling plenum. The kit contains an
8-inch duct flange and a discharge air baffle that
can be installed onto the ceiling panel, as shown,
along with an 8-inch flex-duct. The baffle can be
installed in various orientations, to direct the
discharge air away from the condenser return air
above the ceiling panel.
Note
—Drop ceiling spaces should be vented
or large enough to handle the warm
condenser air. Check local codes to assure
compliance
.
WHEN INSTALLED—-THE CONDENSER
DISCHARGE SHOULD BE DIRECTED AWAY
FROM THE CONDENSER AIR RETURN
DISCHARGE
ADAPTER
CDA-8
CONDENSER
DISCHARGE
8-INCH
FLEX-DUCT
CEILING
PANEL
CK-8, CEILING
DISCHARGE KIT
13
CONDENSER
DISCHARGE
CONDENSER
RETURN
DISCHARGE
BAFFLE
8-INCH DUCT
FLANGE
8-INCH
FLEX-DUCT
CVK-8, CEILING PANEL
CONVERSION KIT
