STANDARD FEATURES
CABINET
The CAC Series spot cooler has a cabinet that is constructed of 18 gauge steel with a
polyester powder coated finish. The matte black finish compliments any surrounding space,
and the cabinet is lined with sound-absorbing insulation for cool, quiet comfort. The CAC
comes equipped with handles and premium swivel casters for portability and convenient
set-up.
DELUXE ELECTRONIC CONTROLLER
The CAC unit is equipped with a deluxe electronic controller. When power is connected to
the unit, the thermostat will cycle the unit to cool a space to the desired temperature. The
thermostat is also capable of controlling the fan to operate automatically (when needed), or
continuously.
AUTO RESTART (FEATURE)
The controller has auto-restart capability. A built-in memory retains the settings, and the
unit will restart to the last set point automatically, after a power failure.
FAN SPEED CONTROL
One of the features of the electronic controller is that the unit supply fan can be controlled
automatically or manually. In AUTO mode, the evaporator blower will adjust air flow
automatically for added comfort and performance. Or, if desired, the fan speed can be set
to MANUAL mode, and the evaporator blower will run continuously at one of six levels of
fan speed.
CONDENSATE RESERVOIR/TANK
The CAC unit comes equipped with a Reservoir Tank for handling the condensate
generated during the cooling process. When the tank is full, the default condition
“CON”
will be displayed. The tank can be easily removed from the unit and emptied as needed.
FILTERS
CAC’s are equipped with washable filters at the air intakes. Electrostatic mesh air filters
located behind the evaporator return air grille serve to filter the air before it is cooled, and
behind the condenser return air grille to prevent dust build-up. Both filters can be easily
removed and cleaned.
HIGH PRESSURE SAFETY SWITCH
Located on the back of the CAC is a manual re-set high pressure switch, used for the
protection of the compressor. If the condensing pressure exceeds the limit setting, the
switch will cycle the compressor off, while the evaporator fan remains running. The display
will indicate
CON
. The compressor can be re-started, once the condensing pressure has
equalized, by depressing the “RESET” button.
POWER CORDS
CAC units come standard with a 10-foot power cord, allowing for convenient connection
and portability. The power cord is equipped with a Leakage Current Detection Interrupt
(LCDI) device for added safety.
3
