Oce VarioPrint 6160, User Manual

Page: 39 / 82

39
Use Océ PRISMAproduction to print prepared Adobe PostScript 3 files
Use Océ PRISMAproduction to print prepared Adobe
PostScript 3 files
Introduction
Océ PRISMAproduction
®
enables you to print prepared Adobe
®
3
™
files directly to
the Océ VarioPrint
®
6160/6200/6250.
The procedure to print these Adobe
®
PostScript
®
3
™
files is basically the same as the
procedure to print Adobe
®
PDF and TIFF files. When you print prepared files,
however, these files can contain processing information, such as the required media
types. In some situations you may have to change this processing information.
The procedure below describes how to print an Adobe
®
Postscript
™
3
™
file directly
in Océ PRISMAproduction
®
and apply the attributes already defined in the data
stream.
Required tool
Océ PRISMAproduction Version at least 3.10.04 or higher
Print files with media attributes in the data stream:
1.
Open the Vario PJM in Océ PRISMAproduction
®
.
2.
Select 'Job Setup / Notes'.
3.
In the 'Setup' section, enter the following.
■
'Job Name'
■
'Page range', usually all pages
■
The printer, which is the Océ VarioPrint
®
6160/6200/6250
■
The other required settings like the number of copies and the output location.
4.
In the 'Notes' section, define the file to print if necessary.
Note: 'Printfile' displays the name of the print file. The upper folder button allows
you to select a file locally from a drop-down list.
The 'Format' setting now displays the format of the selected print file. You can select
another format form the drop-down list. 'IOCA' is the default format or file type for
the PoD module. PDF and TIFF files are converted to this IOCA format. If you want
to store your file you can reconvert the file to the PDF or TIFF format again.
5.
In the section 'Notes' activate 'Take parameter from the file'.