Oce VarioPrint 2090, Configuration And Maintenance Manual

Page: 79 / 141

Printer configuration 75
Change the SNMP settings
Introduction
Task for: system administrator
SNMP (Simple Network Management Protocol) is a standard protocol used to
monitor, troubleshoot and control other SNMP-compliant devices that are
attached to the network.
You maintain the connection of the Océ VarioPrint 2090 to the network. You
can define to use the SNMP protocol ('Enable') or not, the 'SNMP community
name', the 'System description' and up to three 'SNMP manager IP addresses'
to receive notifications of SNMP alerts.
The 'SNMP community name' has a maximum length of 20 characters.
In the context of SNMP, the 'Community name' defines security
characteristics.
■
read permission: use the 'community name''public'
■
write permission: use the 'community name''oce_operator'
To define the 'System description', enter a user friendly description of the
system to present itself with on the network, to be used by for example
IntraLogic (available in future release).
Specify SNMP manager IP addresses, either by IP address or by host name
(max. length 32 characters).
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the
system administrator mode (see ‘
Access the Océ VarioPrint 2090 Settings
Editor in system administrator mode ’ on page 12 ).
Attention:
If you change the SNMP settings, you must restart the Océ
VarioPrint 2090 to activate the new settings.