Oce TDS300, User Manual

Page: 92 / 132

92 Océ TDS300 User Manual
[27] Remove the roll holder from the lower paper drawer
3
Remove the empty core from the roll holder while pressing the knob (see
figure 23 on page 90).
4
Slide the roll holder in the roll of print material while pressing the knob (see
figure 23 on page 90).
It is important to have the knob at the right hand side and the paper as shown
in figure 23.
5
Align the roll with the appropriate lines on the roll holder while you press the
knob.
Place the roll holder with the material in the lower paper compartment (see
figure 28).
da
[28] Reposition the roll in the lower paper drawer
6
Feed the material between the input guide plates against the rollers. Turn the
rollers until the material is visible (see figure 29). Also refer to the sticker
inside the drawer.