Oce TDS300, User Manual

Page: 90 / 132

90 Océ TDS300 User Manual
[23] Press the knob
5
Align the roll with the appropriate lines on the roll holder while pressing the
knob. This line has to be completely visible.
6
Place the roll holder with the material in the drawer (see figure 24).
[24] Reposition the roll
7
Feed the material between the input guide plates against the rollers.
8
Turn the rollers until the material is visible (see figure 25). Also refer to the
sticker inside the drawer.
34"
A0
36"