Oce TDS300, User Manual

Page: 30 / 132

30 Océ TDS300 User Manual
▼
Enter the System menu
1
Press arrow left ( ).
2
Press the Stop key.
3
Press arrow right ( ).
4
Press the Stop key.
5
Press arrow left ( ).
6
You can now enter the System menu.
▼
Set use DHCP server
1
Press the On-line key to put the printer off-line.
2
Select the ‘System’ item with the or key.
3
Press Next/select to enter the ‘System’ menu.
4
Enter password.
5
Select ‘Network sett.’ with the or key.
6
Press Next/select to enter the ‘Network sett.’ menu.
7
Select ‘adapter 1’ or ‘adapter 2’with the or key
8
Press Next/select to enter the ‘adapter 1’ or ‘adapter 2’ menu
9
Select ‘Use DHCP server.’ with the or key.
10
Select ‘Yes’ or ‘No’ with the or key.
11
Press Next/select to confirm.
12
Press On-line to put the printer on-line again.
▼
Set the IP address
1
Press the On-line key to put the printer off-line.
2
Select the ‘System’ item with the or key.
3
Press Next/select to enter the ‘System’ menu.
4
Enter password.
5
Select ‘Network sett.’ with the or key.
6
Press Next/select to enter the ‘Network sett.’ menu.
7
Select ‘adapter 1’ or ‘adapter 2’with the or key
8
Press Next/select to enter the ‘adapter 1’ or ‘adapter 2’ menu
9
Select ‘IP address’ with the or key
The first three digits flash.
10
Enter the first three numbers of the ‘IP address’ with the or key.
11
Press Next/select to confirm, the next digits flash.
12
Enter the next three numbers of the ‘IP address’ with the or key.
13
Press Next/select to confirm, the next digits flash.
14
Enter the next numbers of the ‘IP address’ with the or key.
15
Press Next/select to confirm, the next digits flash.
16
Enter the next numbers of the ‘IP address’ with the or key.
17
Press Next/select to confirm.
18
Press On-line to put the printer on-line again.