Oce PP18C, Operation Manual

Page: 58 / 150

Using the Operator Panel
2-32 ADVANCED OPERATION GUIDE
Changing Network Interface Parameters
This printer supports TCP/IP, NetWare and Appletalk protocols. In
addition, you can install the optional network interface card in the option
interface slot.
Using the operator panel, you can:
• Activate or deactivate TCP/IP, NetWare, and AppleTalk
• Activate or deactivate DHCP
• Enter IP address, subnet mask address, and default gateway address
• Determine whether to print a network status page when the printer is
turned on
1 Press [MENU] .
2 Press
U
or
V
repeatedly until
Interface >
appears.
3 If the current interface is other than network,
press
[OK] ([ENTER]) . A blinking question
mark (
?
) appears.
If the optional network interface card is
installed in the printer,
Option
will be displayed. The setting procedure is
basically the same even in this case.
4 Press
U
or
V
repeatedly until
Network
appears.
5 Press [OK] ([ENTER]) again.
Interface >
? USB
Interface >
? Network