![background image](http://html1.mh-extra.com/html/oce/perfect-binder-c1/perfect-binder-c1_user-manual_3297872062.webp)
Remarks
Action
Step
The specified values are as follows:
• Total height of curl: -10 mm to
+10 mm (-0.4" to +0.4").
Upper (1) : 0 mm to +10 mm (0"
to +0.4")
Lower (1) : 0 mm to -10 mm (0"
to -0.4")
• Length of curl (2): More than 50
mm (2")
Note:
If downward curl is mea-
sured, it may cause incorrect
value since the curl is negat-
ed. Be sure to measure up-
ward curl.
Confirm the curl is in the range of
specified value.
3
You can adjust the curl correction for
a specific paper in the Settings Edi-
tor, section 'Media management',
option 'Printer adjustment'.
Note:
If the curl can not be correct-
ed within the specified range
by following the adjustment
above, or paper jams, errors
or defects in bindings occur
frequently, load other paper
type into the paper source.
If the curl state of paper exceeds
specified value, adjust the curl correc-
tion to make it an appropriate range.
4
Chapter 5 - Troubleshooting
62
Reduce frequent paper jams or errors
Summary of Contents for Perfect Binder-C1
