![background image](http://html1.mh-extra.com/html/oce/perfect-binder-c1/perfect-binder-c1_user-manual_3297872068.webp)
Adjust glue amount
Introduction
When you make a booklet in the perfect binding mode, you must use the correct amount
of glue, or the bound booklets may be poorly finished, as shown below.
#
Finishing condition
Amount of glue
Normal
Glue protrudes from
booklet.
Booklet jam occurs.
Too much glue
Spine is not attached
evenly to the main docu-
ment.
Main document detaches
from the cover.
Too little glue
When to do
When the bound booklets are poorly finished.
Chapter 5 - Troubleshooting
68
Adjust glue amount
Summary of Contents for Perfect Binder-C1
