Oce im4512, Operation Manual

Page: 9 / 16

7
CLEAR ALL DATA IN JOB STATUS JOBS COMPLETED LIST
This setting is used to clear all data (printer user names, fax/image send destinations, and
received fax sender information) from the list that appears when "COMPLETE" is selected
in the job status screen (page 1-15 of the "OPERATION MANUAL (for general information
and copier operation)"). To clear the data, touch the [CLEAR ALL DATA IN JOB STATUS
JOBS COMPLETED LIST] key. A message asking you to confirm the clear ("YES" or "NO")
will appear. Touch the [YES] key to begin clearing the selected data. During clearing,
progress will be shown as a percentage together with the number of repetitions. When data
clearing is finished, the power of the machine will turn off temporarily and then turn on again
automatically.
CLEAR ADDRESS BOOK DATA/IMAGE SEND REGISTERED DATA
This setting is used to clear the items indicated below, which cannot be cleared or initialized
using the "CLEAR ALL MEMORY" setting (page 6) or "RESTORE FACTORY DEFAULTS"
(page 15 of the "ADMINISTRATOR SETTINGS GUIDE") setting.
●
INDIVIDUAL/GROUP/PROGRAM/RELAY BROADCAST MEMORY BOX
● SENDER CONTROL LIST
●
POLLING MEMORY/CONFIDENTIAL MEMORY BOX
● SENDER DATA
●
ALLOW/REJECT RECEPTION SETTING DATA (INCLUDING POLLING PASSCODE
NUMBER)
●
FORWARD INFORMATION
Select the checkboxes of the items that you wish to clear. (There are two screens. Touch the
or key to move between the screens.) To clear the data, touch the [CLEAR] key. A
message asking you to confirm the clear ("YES" or "NO") will appear. Touch the [YES] key
to begin clearing the selected data. During clearing, progress will be shown as a percentage
together with the number of repetitions. When data clearing is finished, the power of the
machine will turn off temporarily and then turn on again automatically.
MX-FRX7U.book 7 ページ ２００７年６月１２日 火曜日 午前８時１０分