Océ 6407 Basic Operation Guide
14
Precautions on handling printouts
Do not touch the printed surface of the media before the ink dries, or especially 24 hours after printed.
Handle the printout by securing the margins.
Do not scratch the printout to avoid the color lost or transferred. To avoid the printout’s color
transferred, do not put the printed media on the other printed media with their printed surface facing
each other.
Do not put the printed media on the printout from copier or laser printer. The printouts’ ink or toner
may stick the two printouts.
Note that an ink on the printed surface may come off if the surface is rubbed hard or scratched.
The printed image may bleed or be lost if the water-stained printout is scratched hard or left.
Other precautions
Media loses its color and quality with age. Check the media condition and select the media with better
condition.
Cut the media carefully, as its paper dust may cause bubble surface at laminated.
When adhesive-backed media is applied, some adhesive agent may be left on the platen, which
may cause a media jam. So clean the agent completely with a soft cloth moistened with the neutral
detergent.
Available area on media
The available area on media in scanning direction depends on media width, media edge guards application,
and stripe bar presence. With the media edge guards and stripe bar applied, your available area is decreased by
34.9mm in right and 10.0mm in left. The available are is decreased more when the optional product below is
applied:
- Wide type media edge guards for platen sheet
Media width
Media width
Printable area
Color stripe
:YES
Printable area
Media edge guards
:YES
Color stripe
:NO
Media edge guards
:YES
41.9mm
15.0mm
15.0mm
15.0mm
Without wide type media edge guards for platen
sheet
ޓ
With wide type media edge guards
34.9mm
29.9mm
10.0mm
10.0mm
10.0mm
5.0mm
5.0mm
5.0mm
Color stripe
:YES
Media edge guards
:YES
Color stripe
:YES
Media edge guards
:NO
Color stripe
:NO
Media edge guards
:YES
Color stripe
:NO
Media edge guards
:NO
