Oce CS230 Phase 3, User Manual

Page: 111 / 686

Before making copies 3
CS230 (Phase 3) 3-33
Automatically canceling the settings (automatic panel reset)
If the [Reset] key is not pressed and no operation is performed for a specified
length of time, settings that have not been programmed, such as the number
of copies, are cleared and return to their default settings.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after
1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set from the Utility mode. For
details, refer to “System setting” on page 13-39.
Whether or not the automatic panel reset operation is performed when
there is a change of user can be set from the Utility mode. For details,
refer to “System setting” on page 13-39.