Oce CS 5090, User Manual

Page: 35 / 199

Getting started 35
Run a colour test
An initial colour test checks for correct cartridge priming, to ensure that all
colours print in a uniform and solid pattern.
▼
▼ ▼
▼
To print the colour test
1
Check that the printer has media loaded.
2
Press
Setup menu/Print Mode menu
.
3
Press
Print passes
.
4
Change to 2-pass mode using the Next or Prev option buttons.
5
Select
Utility menu/Service menu/Diagnostics menu/Colour Test menu.
At this stage, you can choose between two different options:
■
Print a colour test for each colour separately, one after the other.
■
Print a colour test for all colours at the same time (only supported by
firmware version 1.13 or above).
▼
▼ ▼
▼
To print the test (colours one by one)
1
Press
Stall select
to select the appropriate colour to test using the Next or Prev
option buttons.
2
Press
Density select
to set the *colour test percentage to 100%.
3
Press
Colour test print
. Several print passes will initiate in the chosen colour,
disregard the quality of the colour patterns.
4
Ensure each print passes completes.
▼ ▼ ▼ ▼
To print the test (all colours at the same time
Note:
The all colour test is only supported by firmware version 1.13 or above.
1
Press
Density select
to set the colour test percentage to 100%.
2
Press
All Colour test
to initiate the test.
Note:
No ink starvation should be observed. If you notice ink starvation,
re-prime the cartridge and check the ink level.