Oce CS 5090, User Manual

Page: 19 / 199

Getting started 19
Load roll media
▼
▼ ▼
▼
To load roll media
1
Slide the rolled media onto the media (upper) roller, orienting the paper as
shown.
2
Slide the media guide into the roll core, and tighten the guide to secure the roll
by turning the knob clockwise.
3
Standing behind the printer, insert the media's leading edge into the back of the
printer. The printer automatically detects the presence of the media and
forwards it.
4
Press
Load Media
to move the media into printing position.
[3] Loading media
Use the take-up roll
The take-up roll facilitates unattended print jobs by automatically winding
printed media onto a core. In this mode, the automatic c.utter is disabled. When
using this option, be sure that the media sensor on the printer's right leg is not
blocked.
▼
▼ ▼
▼
To install the take-up roll
1
Install an empty core onto the take-up guides. Be sure that the core width
matches the width of the media you are using.
2
Slide the roll guide onto the media core, and secure it by tightening the locking
mechanism. If you moved the sensor mounting bracket before loading the roll
media, be sure to return it to its normal position.
3
Since media cores can be narrower than the media, position the media guide at
3 mm (1/8”) from the end of the core and lock it into place.
! ! ! !
Click for Video
!
! !
!
Click for Video