![background image](http://html2.mh-extra.com/html/oce/4700-series/4700-series_installation-manual_3216737026.webp)
26
4700 Series Scanners Installation Manual
Changing the power voltage
Your scanner power voltage has been preset to meet the 220 V requirements.
To change it to fit other national standards, proceed as follows:
1
Turn the scanner off and disconnect the power cable. Locate the power
assembly (
A
) at the back of the scanner.
2
Open the voltage box (
B
) by lifting the plastic tab with the tip of a screwdriver.
3
Remove the fuse block (
C
).
4
Rotate the fuse block 90°, 180° or 270° so that the appropriate voltage appears
in the voltage aperture.
5
Put the voltage box back into its orinal position, reconnect the power cord and
turn the scanner on.
[13] Changing the Power Voltage
B
C
A
220120
100240
220120
100
240
Summary of Contents for 4700 Series
