24
4700 Series Scanners Installation Manual
Maintenance
Cleaning the scanning area
Clean the scanning area from time to time to remove any residual paper dust.
1
Switch the power Off and disconnect the power cord. Gently open the top
cover (
A
) as shown in figure 9 on page 23.
2
Holding the handles (
C
) at each end of the guide plate (
B
) as shown in figure
10, lift the guide plate up and away from the scanner. Place the guide plate on
the top cover.
3
Carefully wipe clean the glass plate and the white area on the guide plate with
a cleaning solution suitable for computer peripherals.
4
Put the guide plate back in its operating position as shown in figure 11. Hold
the handles (
C
) up and position the vertical tabs (
D
) over the notches (
E
).
Lower the guide plate into position.
[11] Replacing the Guide Plate
D
E
Summary of Contents for 4700 Series
