background image

68

www.Observint.com

2.  Click 

Save Settings

 on the 

Parameter Management

 menu. 

3.  Follow the on-screen instructions to complete the operation. You must enter the 

admin

 user password to complete the save 

operation. 

4.  Allow the operation to complete before continuing. The default name for the file you saved is 

DEVICE_Settings

. See below. 

5.  Remove the flash drive from the USB port and store it in a secure place for possible use later. 

To Load the Main Menu settings: 

1.  Plug a USB flash drive containing the Main Menu Settings you saved earlier into a USB port on the recorder.
2.  Click 

Load Settings

 on the Parameter Management menu. 

3.  Navigate to the Main Menu Settings file you want to load and select it. 

4.  Follow the on-screen instructions to complete the load operation. You must enter the 

admin

 user password to complete the 

load operation. 

5.  Allow the operation to complete before continuing. 
6.  Remove the flash drive from the USB port and store it in a secure place for use later. 

SECTION 8: SYSTEM SETTINGS 

Summary of Contents for NVR16






















































































































Reviews: