Observint NVR16 Firmware User Manual Download Page 66

Page: 66 / 117

www.Observint.com

—

Transparency

: Drag the slider left or right to change the transparent of the Menu Bar and the Main Menu.

4. Click

Apply

to save your settings.

8.2 Multi-User setup

This menu allows you to configure the user name, password and user permission.

The system supports the following account types:

—

admin

: System Administrator, has full control of the system. Administrators can change both administrator and user

passwords and enable and disable password protection.

—

None

: Normal User has access to Live View, Search, Playback, and other functions. You can setup multiple user accounts

with different levels of access to the system.

Change Password

To change the password for the administrator or user accounts:

1. Click the

User Edit

icon . Password must be at least 8 characters and can contain a combination of numbers and letters.

SECTION 8: SYSTEM SETTINGS

Summary of Contents for NVR16






















































































































Search results

Summary of Contents for NVR16

Reviews:

Related manuals for NVR16

Brands by name

Popular brands

Observint NVR16, Firmware User Manual

Search results

Summary of Contents for NVR16

Reviews:

Related manuals for NVR16

Brands by name

Popular brands