Observator Instruments OMC-140, Installation Manual

Page: 50 / 68

OMC-140 Installation Manual Page 50
The OMC-140 multifunctional display will also accept the following retired sentences:
Note: These messages will only be used for display and not forwarded to the output!
$--MDA,x.x,I,x.x,B,x.x,C,x.x,C,x.x,x.x,x.x,C,x.x,T,x.x,M,x.x,N,x.x,M*hh<CR><LF>
1 2 3 4 5 6 7 8 9 10 11
1.
Barometric pressure, inches of mercury *
2. Barometric pressure, bars *
3.
Air temperature, degrees C
4. Water temperature, degrees C
5. Relative humidity, percent
6.
Absolute humidity, percent
7. Dew point, degrees C
8.
Wind direction, degrees True
9. Wind direction, degrees Magnetic ----will not be used!
10. Wind speed, knots **
11.
Wind speed, meters/second **
*
Barometric Pressure in ‘mercury’ will only be read when in ‘Bar’ is not available and will
be displayed in the equivalent value in hPa.
** Wind speed in knots will only be read when Wind speed in m/s is not available.
$--MHU,x.x,x.x,x.x,C*hh<CR><LF>
1 2 3
1. Relative humidity, percent
2. Absolute humidity, percent
3. Dew point, degrees C
$--MMB,x.x,I,x.x,B*hh<CR><LF>
1. Barometric pressure, inches of mercury
2. Barometric pressure, bars
$--MTA,x.x,C*hh<CR><LF>
1.
Temperature, degrees C