Observator Instruments OMC-140, Installation Manual

Page: 27 / 68

OMC-140 Installation Manual Page 27
6.4.4 Enabling parameters without the actual data
If you do want to preconfigure the screen layout without any sensor data, you can enable data messages
via the USB terminal mode:
how to connect and enter the menu (see 8 Terminal Mode Configuration).
Navigate to:
1. Device settings
1. Display intensity
2. Sensor 1
3. Sensor 2
If you already know to which port you will connect select the corresponding sensor port.
Otherwise simply open sensor 1.
Change the status of the required data from ‘Auto’ to ‘On’
Installation Settings Sensor 1:
Watchdog Time
1 Baudrate (4800)
2 Watchdog (OFF)
3 MWV Relative (AUTO)
4 MWV Theoretical (AUTO)
5 MWD True (AUTO)
6 GGA GPS Quality (AUTO)
7 VTG GPS Ship Heading (AUTO)
8 HDT/THS Gyro Heading (AUTO)
9 VHW Log Speed
(AUTO)
A XDR Data (AUTO)
B GMP GPS Data (AUTO)
C GST GPS Data
(AUTO)
D MHU Humidity Data (AUTO)
E MMB Baro Data
(AUTO)
F MTA Air Temp. Data (AUTO)
G MDA Combined Data (AUTO)
H MTW Water Temp. Data (AUTO)
I VIS Visibility Data
(AUTO)
J CME Cloud Data (AUTO)
K BTD Lightning Data (AUTO)
L DBK Depth Data
(AUTO)
M DPT Depth Data (AUTO)
N VLW Water Distance (AUTO)
O VBW Water Speed (AUTO)
P ROT Rate Of Turn (AUTO)