Kalix Sanitisation Procedure
.
TECHNICAL
BULLETIN
OAS0033A
181218
OAS0033A
10
Diagram 14.1
Diagram 14.2
•
Replace side panel onto the cooler. Position the key slot in panel on the screw in the front
fascia, and slide panel downward over locater in moulded base
•
Affix 3 screws in position illustrate in (Diagram 14.2).
Diagram 14.3
Diagram 14.4
•
Reposition top of Kalix as per (Diagram 14.3)
•
Slide top over push buttons, then secure in position via two screws at the back of the cooler.
•
Ensure cup dispenser is firmly in position before securing screws.
•
Return filter compartment door to its exact position, then replace drip tray to its place.
14.
Finally the new filtration system needs to be flushed out of the cooler.
•
Turn on mains water supply and connect electrical supply to the cooler.
•
First dispense water from the cold side of the cooler for 2 minutes.
•
Then dispense water from the cook side of the cooler for 60 seconds.
