Kalix Sanitisation Procedure
.
TECHNICAL
BULLETIN
OAS0033A
181218
OAS0033A
9
•
Position filter head and mounting bracket over screws and slot into place. (Diagram 13.3)
•
Re-Tighten screws.
•
Push filter into filter head and lock into position. (Diagram 13.4)
Diagram 13.5
Diagram13.6
•
Take water-outlet and ¼ Inch reducers from sanitization solution and rinse under flowing tap.
•
Rebuild water-outlet assembly with ¼ Inch reducers, and place in original position.
•
Attach spout to water-outlet, and tighten into position. (Diagram 13.6)
•
Re-attach new tubing to Water outlet on cook and cold sides.
•
Reassemble Tee-piece with solenoids with replacement tubing; and reposition solenoids with
substitute cable ties.
•
Affix bulk head fitting.
•
Install all replacement blue tubing and connect the filtration system, back in line. Ensure tight
connections
•
Connect from bulk head fitting to inlet of filter head, and outlet of filter head to Tee-connection
located on shelf.
13.
Reassemble unit
