Oasis I19, Installation Instructions Manual

Page: 10 / 44

8
3.INSTALLATION AND CONNECTION
Installation items:
The factory only provides the main unit and the water unit; the other items in the illustration
are necessary spare parts for the water system ,that provided by users or the installer.
3.1 Installation illustration
Attention:
Please follow these steps when using for the first time
1.Open valve and charge water.
2.Make sure that the pump and the water-in pipe have been filled with water.
3.Close the valve and start the unit.
ATTN: It is necessary that the water-in pipe is higher than the pool surface.
Chlorinator cell
Water outlet
Pool
Valve
Water supply
Water inlet
Water pump
Sand filter
(or other type filter)
The schematic diagram is for reference only. Please check the water inlet/outlet label on the
heat pump while plumbing installation.
2.2 The dimensions for Swimming Pool Heat Pump Unit
Models:Oasis I19
unit
：
mm
2.SPECIFICATION
7
Water inlet
Φ
40
Water outlet
Φ
40
9
6
790
490
8
6
2
4
6
6
1115
1160
4
6
7