TROUBLESHOOTING (TO BE PERFORMED BY STORE PERSONNEL), CONT
’
D
-
PAGE 2 OF 2
42
LED Style Light Fixtures
Removal of faulty LED light:
•
LED lights rarely require change
-
out.
•
To remove faulty LED light, simply grasp light
near retaining spring and carefully pull away
from its spring. Disconnect plug from LED
’
s
socket.
•
Contact Structural Concepts
’
Technical Service
Department for replacement parts (see
Technical Service section of this manual for
information).
LED
’
s Oval Form
Plug
’
s
Oval Form
---
LED Plug & Light Fixture
---
Retaining
Springs
Plug
A
B
LED
’
s Barrel
Shaped
Insert
LED
Light
“
B
-
Shaped
”
LED Plug & Light Fixture
“
Barrel
-
Shaped
”
LED Plug & Light Fixture
Replacement of LED light:
•
To replace LED light fixture, simply insert new
LED light at proper position (socket must be near
plug). Carefully snap into metal springs so LEDs
are held firmly in place.
•
Note: LED light and plug must be connected in a
specific manner or they will not work.
A.
Certain plug designs
(“
barrel type
”)
merely require
that plug be pushed all the way in.
B.
Other plugs require
“
oval edge
”
of plug to
connect to oval edge of LED light.
•
See illustrations below.
No Gap
Gap
