CX Logix Operation MANUAL
– Updated July 2022
Page 7 of 15
9.
INSTALLING THE pH CONTROLLER
Installation Diagram
1 Pool Filter
2 Heat Pump
3 Pool Pump
4 Pool Sanitiser
5 Cell Housing
6 CX Controller
7 Injection with Tee
8 Suction with Drum weight & label
9 PVC Flexible Tube 6m
STEP 1
Remove the contents from the box and carefully plan all steps using the installation
diagram, and by reviewing the steps below.
STEP 2
Position the CX Logix controller box as indicated in the installation diagram, ensuring it is
NOT too close to other equipment or power outlets, but close enough to the Oasis
Chlorinator power supply so the piggy-back power cord can plug in to its socket outlet.
STEP 3
Attach the CX Logix
controller to the wall by removing the simple “Click ON – Click OFF”
wall mounting bracket that is attached to the controller case. Use the wall plugs and screws
provided.
3.1: Click OFF the wall bracket clip
3.2: Pull the wall bracket away from case.
3.3: Mount the bracket to the wall
3.4: CLICK ON the case to the wall bracket
This unique design keeps the controller case unexposed to any possible water entry.
Summary of Contents for CX Logix
Page 1: ......
