Oase AquaMax Eco Expert 21000, Commissioning

Page: 13 / 136

EN
13

Avoid exposing any unit components to direct sunlight for extended periods of time, as this
can lead to damage. If necessary, use a protective cover.
Connecting the control system
The pump can be operated with or without the control system.
•
The control system makes it possible to regulate the pump power.
•
Without the control system, the pump runs permanently at full power.
Compatible control systems (accessories):
•
Eco Control
Intelligent control system for one pump.
•
Incenio FM-Master Home/Cloud
Garden Controller Home/Cloud
Up to 10 OASE Control-compatible units (pumps, filters, lights) can be controlled using the
"OASE Control" app.
For information on this topic, visit www.oase.com and navigate to the section “Smart garden
controls and lighting”.

For information, please refer to the operating manual.
Connecting and disconnecting the OASE Control plug connection
PLX0004
NOTE
The unit will be damaged, if water enters the plug connector.
 Connect the plug connector or place the protective cap on it.
 Ensure that the rubber seal is clean and fits exactly.
 If the rubber seal is damaged, it must be replaced. When the plug connector is disconnected,
the rubber seal must be replaced if it is older than 2 years.

Always secure the plug connector or the protective cap with the two screws.
Submerged installation of the pump
Connecting
 B
Do not plug the power plug into the socket yet!