18
MAINTENANCE & SERVICE
MAINTENANCE
& SERVICE
• Is the unit plugged in?
• Does the outlet have power?
• Check all connections of the control box, is everything seated securely?
• Do any of the foot control buttons work?
QUESTIONS TO ASK BEFORE CALLING CUSTOMER SERVICE
To replace the foot control, follow these steps:
1.
Unplug power cord.
2.
Follow control cord to locate junction box
3.
Using a small screwdriver or tool, remove locking ring
4.
Pull cable to remove from junction box
5.
Insert new control cable and replace locking ring
6.
Reconnect power cord.
7.
Attempt to operate the table elevation functions from the control.
8.
Should this fail to return the table to operating condition, contact
the Customer Service Department at 717-235-6807.
FOOT OR HAND CONTROL
REPLACEMENT INSTRUCTIONS
Replacement of the foot or hand control may be necessary if the control does not
actuate the table functions. See troubleshooting section before ordering replacement
controls.
IMPORTANT
Always unplug power
cord before removing or
connecting cables to the
control box.
SAFETY NOTE:
Hand and Foot
Control Cables
Junction Box
Locking Clip
