background image

ACCESSORY OPTIONS

Important Safety Note: Maximum 

Distance from edge of table = 3”

QuickLock

 FACE REST:

• Accessory Option:

 QuickLock

 

 Face 

Rest

* U.S. Patent #5,177,823

Do not put excessive weight 
or pressure on the face rest.  
Excessive pressure can cause 
premature failure of the 
QuickLock

 Face Rest.

Double articulating action provides nearly limitless positioning options 

with the QuickLock

 Face Rest.The adjustable pad takes pressure off  

sensitive facial areas while providing superb support. The QuickLock

 

Face Rest can be used in both prone and supine positioning and folds  

out of the way when not in use. Adjustments are made easily by loosen-

ing the cam locks, adjusting for height and angle and then locking the 
cam locks into that position. The 

Antigua

 has outlets at the head of the 

table for a variety of uses and outlets at the other end that work as well 

for additional procedures.

Attaching the QuickLock

 Face Rest / Head & Foot End Outlets:

When attaching the QuickLock

 Face Rest to the head or foot end by 

using the provided outlets, just slide the frame dowels into the outlets 

being sure to keep the 1st cam lock within 3” of the table to ensure a stable 

connection. 

To remove the QuickLock

 Face Rest, just pull the frame from the outlet 

until it comes free. Set it safely aside or store it inside the under-table 

cabinet until needed.

3”

 QuickLock

 Face Rest

Important Safety Note: Maximum 

Distance from edge of table = 3”

 

Be sure to read all 

 

 

cautions, warnings    

 

and instructions given   

in the manual to  prevent 
injury to both operator  
and client.

IMPORTANT

DIRECTIONS FOR USE

12

ACCESSORY OPTIONS

• QuickLock

 Face Rest

outlets

CAUTION

Summary of Contents for antigua ATBR





























Reviews: