WARNINGS & SAFETY INSTRUCTIONS
v
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
GROUNDING INSTRUCTIONS
GROUNDING
INSTRUCTIONS
WARNINGS & IMPORTANT SAFETY INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. See U.S. sample below.
This product is manufactured for use on a nominal 120-volt circuit for the
United States and a nominal 220-volt circuit for use in Europe. The plug has
a grounding pin in a pattern that varies by country as shown in the Product
Identification section of this manual. Make sure that the product is connected
to an outlet having the same configuration as the plug.
G
• To remove the accessories from the cabinet: Turn the accessory controls
to the ‘off’ position and then disconnect the unit from the interior
power source by removing the plug from the outlet.
When moving the table: Turn the accessory controls to the ‘off’
position,
disconnect the table from the exterior power source by
removing the table plug from the outlet.
Plug table into an outlet that is surge protected to a level of 750J or higher.
Failure to do this may void all or part of the warranty.
Correct Implementation
Incorrect Implementation
READ AND
SAVE THESE
INSTRUCTIONS
READ AND
SAVE THESE
INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
(CONT.)
DANGER-
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician
or service man if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product - if it will not
fit the outlet, have a proper outlet installed by a qualified electrician.
To reduce the risk of electric shock, this furnishing has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
No adapter should be used with this product.
WARNING
CAUTION
CAUTION
CAUTION
