TROUBLESHOOTING
I
F
THE
A
NTIGUA
™
WILL
NOT
CHANGE
HEIGHT
OR
POSITION
:
• Check the outlet to be sure that it has power and that the power
cable is plugged in. Try each Foot Control and Hand Control to
see if any work. If any work, then possibly there is a loose connection
or a faulty controller.
• Unplug the power cable from the wall outlet.
• Make sure that all male and female connectors are firmly
pushed into each other. Even a slight misconnection can
cause a possible malfunction.
• Plug the unit back into the wall and check the controls
again. If one or more of the controls still do not work,
contact Customer Service at 800-558-8850 to arrange
replacement.
TROUBLESHOOTING
The table weighs as much
as 200 lbs.
DO NOT
lift or
move the unit without using
proper safety procedures
or equipment.
DO NOT
turn
the
Antigua™
on its side for
any reason. To do so could
cause damage to the base
and
will
void the warranty.
There are no serviceable
items that require this action.
Never lift the table by grasp-
ing the table top as the
table top is not
designed to
hold the weight of the base
and you could damage the
table.
Before doing any work on the
unit,disconnect the power
cord from the power outlet.
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
•
Controls
IMPORTANT
15
TROUBLESHOOTING
• If
Antigua™
will not Change Height or Position
CAUTION
CAUTION
