When moving the table, place one person at each corner of the table. Have each person firmly grasp the
base at the bottom and lift the table. Be aware and use proper, safe procedures for moving a table of this
size to prevent injury to yourself or the table. We strongly recommend that a flatbed dolly be used that can
hold the entire table when moving the table long distances.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. The table weighs as
much as 250 lbs. (113 kg.) Never lift the table by grasping the table top. You could damage the
table and the electronics that run the tabletop. Four people are required to move the table safely.
Do not use the table to transport a client.
DIRECTIONS FOR USE
Grasp at base
corner
At low height range
1/2” (13mm) Open
end Wrench
Leveler Foot
1. Place the table in the location where
you plan to use it.
2. Rock the table to determine if it is
level with the floor. If the table rocks
back and forth at all, the foot that
clears the floor when you rock the
table will need adjustment.
3. Adjust the Leveler Foot by first
loosening the locking nut found just
above the rubber Leveler Foot with
the open-end wrench.
4. Lower the adjustable rubber Leveler
Foot until it meets the floor snugly.
Tighten the locking nut against
the wooden leg of the table with the
open-end wrench to fix the Leveler
Foot in position.
5. Rock the table again to be sure
adjustments have stabilized the
table. If necessary make any addi-
tional adjustments in the same way.
Tighten Locking Nut
Locking Nut
LEVELING THE TABLE
13
