The Table is designed to be a stand-alone table. This table must not be modified or incorporated into any other
equipment.
As with any moving mechanism there are potential pinch points around and underneath the table. It is the
responsibility of the operator of this equipment to insure that bystanders are not in the area below or around this
equipment during operation.
Proper operation of this equipment is very important for the safety of the operator, client, and any other
individuals in the area of this equipment. Directions for use of this equipment are described in this manual.
The operator should read these sections carefully.
Weight Limit: (Client and accessories) 550 lbs. (250 kg) Do not exceed.
Adjustable Breast Comfort (ABC) System Weight Limit - 100 lbs. (45 kg.) Do not sit on the ABC System.
Do not place foreign objects into the ABC System. Only use as intended.
For safety of your client, use a
cloth sheet between the ABC System and your client.
Be certain that the table is completely lowered without any tilt being present prior to
discharging an ambulatory client. The client may lose balance and fall.
This table is not suitable for use in the presence of flammable anesthetic mixture with air or oxygen or
nitrous oxide.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not lift table by the table top. This can damage the table.
When lowering the table, make sure there is nothing underneath the table top that can impede motion (like
stools, cabinets, accessory parts, cleaners, etc)
Use this furnishing only for its intended use as described in these instructions. Do not use attachments not
recommended by the manufacturer.
Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at
717.235.6807.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in
this manual.
Electrical Shock Hazard - The power supply/control module is located on the lift frame. No user serviceable
parts are inside. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables con-
nected to the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS
